Reviews For T.H.E. Accessories Captive Guide Rod, GRC1923TU, Fits Glock 19/23/25/32, Tungsten

By CAglock
Review Date: 10/08/2009
Rating:

If you forgot to order spring you can use the spring from your stock guide rod. Plant rod on non-slip surface and pull spring down exposing rod. With common pliars, pull out plug on end of rod. This releases spring. Now put spring on new rod and pull down and hold with pliars. Slide new washer over rod and screw in new threaded plug hand tight. Release spring and tighten plug a little more with hex. Install new guide rod and you''re in business.

By CE
Review Date: 01/29/2010
Rating:
Purchased From This Site: Yes

This tungsten guide rod provides a little extra weight on the business end of your Glock. Additionally, it will not bend or warp as will the factory plastic rod. Good product. Shipping was prompt and package arrived in perfect condition. LOCTITE and hex wrench not included.

By wball
Review Date: 02/06/2010
Rating:

Some instructions would be helpful. The information provided by Aglock was most helpful in which end to put the wsher on, and to use locktite. Othewise the part arrived timely, installed easily and add a little noticable weight to the front end of my model 23.

By SA
Review Date: 06/07/2010
Rating:
Purchased From This Site: Yes

I took my G19 from the stock rod to a s/s rod and then on to a tungsten rod. Coupled with a 15lb spring the changes improved overall recoil handling. I noticed an immediate change in double-taps with spacing improving dramatically. I am thrilled with these changes.

By DY
Review Date: 08/12/2008
Rating:
Purchased From This Site: Yes

I bought this guide rod to drop in for my local tactial shoot. Even when shooting for accuracy my impact is low and to the right when I normally would take out the centers. At least it will not break.

By KB
Review Date: 12/09/2008
Rating:
Purchased From This Site: Yes

Proper fit. Does not come with spring, you need to order 1, this is the rod only. It does add weight and is not needed but nice.

By MB
Review Date: 12/10/2008
Rating:
Purchased From This Site: Yes

Directions for us morons on how to replace our stock system with this would have been helpful. However, even I figured it out (just break the old one in half to get the spring off) and this tungsten rod is absolute top quality. Glock should just step up to the plate and contract these guys to make it for them or buy their tooling and do it on all Glocks.

By SS
Review Date: 02/17/2009
Rating:
Purchased From This Site: Yes

It was a simple add on, that really allowed you to feel the difference directly after the install..great piece. JUST A NOTE Remember this comes without a spring!